1 / 7
Plug and play belted Nema 17 Gear Box for Extruders — image 1
1 / 7

Plug and play belted Nema 17 Gear Box for Extruders

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a plug and play belted gear box with 3.5:1 gear ratio (when using a 16t pulley). I'm using it on my Bear…

Rating
0 / 5
Likes
5
Downloads
15
Makes
1
Views
499
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is a plug and play belted gear box with 3.5:1 gear ratio (when using a 16t pulley). I'm using it on my Bear extruder with an LDO 0.9 Slim Power stepper. Very inspired by https://www.thingiverse.com/thing:3553286 and https://www.thingiverse.com/thing:2845416

Print with PETG without supports, vertically (it should look like an arrow pointing up on the plate). Use at least 3 perimeters and 12% gyroid infill.

Required hardware:

3x m3 20-25mm screws + washers

1x gt2 140mm closed belt

1x 16t pulley

2x 105zz bearings

1x ~40mm x 5mm shaft

Category: 3D Printer Extruders

Tags