1 / 6
IKEA Lixhult Air Hole Grommets — image 1
1 / 6

IKEA Lixhult Air Hole Grommets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I bought a Lixhult metal cabinet from Ikea and wanted to place backup hard drives inside the cabinet. In order to…

Rating
0 / 5
Likes
2
Downloads
13
Makes
0
Views
268
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I bought a Lixhult metal cabinet from Ikea and wanted to place backup hard drives inside the cabinet. In order to ensure proper cooling of the drives, I needed to make some air holes in the front of the cabinet. These air hole grommets fit over the holes I made in the cabinet sheet metal, allow airflow, but hide the sharp edges around the holes. There are two air grommet designs: small for the front (12mm) and large for the back (31.75mm).

The holes on the front of the cabinet were made by first drilling small pilot holes and then using a stepper drill bit to create 12mm diameter air holes. You'll notice there's a vertical area where I did not place grommets. That's because on the inside of the cabinet lid there's a vertical bar which provides rigidity to the cabinet door and I wanted to avoid getting too close to it.

The grommets are then pushed into the holes.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

100%

Filament: Any PLA Grey How I Designed This ===================

Both grommets were designed in Fusion 360.

Category: Household

Tags