IKEA Lixhult Air Hole Grommets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a Lixhult metal cabinet from Ikea and wanted to place backup hard drives inside the cabinet. In order to…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I bought a Lixhult metal cabinet from Ikea and wanted to place backup hard drives inside the cabinet. In order to ensure proper cooling of the drives, I needed to make some air holes in the front of the cabinet. These air hole grommets fit over the holes I made in the cabinet sheet metal, allow airflow, but hide the sharp edges around the holes. There are two air grommet designs: small for the front (12mm) and large for the back (31.75mm).
The holes on the front of the cabinet were made by first drilling small pilot holes and then using a stepper drill bit to create 12mm diameter air holes. You'll notice there's a vertical area where I did not place grommets. That's because on the inside of the cabinet lid there's a vertical bar which provides rigidity to the cabinet door and I wanted to avoid getting too close to it.
The grommets are then pushed into the holes.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament: Any PLA Grey How I Designed This ===================
Both grommets were designed in Fusion 360.
Category: Household