1 / 1
Big Green Egg Handles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement handles for a Big Green Egg smoker
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 596
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement handles for a Big Green Egg smoker. These are modeled to the same dimensions as the original wooden ones, and are intended for use with the original Imperial hardware.
The nut side will require heat-staking in the nuts with a soldering iron, as to prevent them falling out
Recommended print settings:
- ABS/ASA or other temperature resistant material
- 0.16-0.2 layer height. The fillets might be cleaner with a smaller layer height, but it's fine either way
- 4-5 perimeters
- 25-40% infill. The extra mass should help with temp resistance and deformation from heat
- 5-7 top/bottom layers