1 / 4
Rock Band Xbox One Controller Strap Peg
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I lost the plastic peg that fits in the top of the guitar so I made my own!
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 93
- Makes
- 0
- Views
- 800
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
I lost the plastic peg that fits in the top of the guitar so I made my own! I split the model down the middle to orient the layers perpendicular to the pulling forces of the peg. Glued the halves together and it works perfect.
Print instructions
Split the model in half laying down and glue halves together
Since the peg is going to be pulled, the best way to print the piece is horizontally to increase the strength.
Printed in Galaxy Black PLA at 215/60
No supports/rafts needed unless it struggles to stick.