1 / 1
Smart Meter Optokopf / Sensor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for a DIY smart meter sensor
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 0
- Views
- 717
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for a DIY smart meter sensor
Inludes holes for a 3mm phototransistor and two 5x5x5mm magnets at the bottom. I also made a large cutout for a ~10mm wide screw terminal.
Electronics (german): by Paul Görgen and some Informations (the 1k pullup resistor) from MSXFAQ