1 / 1
DIY Clothes Rack Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting brackets for DIY clothes rack
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 1
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mounting bracket that uses M6 screws to hold an aluminum extrusion. It can hold an elliptical or circular profile with 15 mm diameter. Just print two brackets and space them apart to fit your extrusion.
Supports: No (If you are having problems printing the threads, then yes)
Material: PLA+ or ABS
Layer Height: 0.2
Infill: %60