NoClogClone Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a handle you can use if you want to create your own NoClogger device https://noclogger.com/.
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 223
- Makes
- 6
- Views
- 1,722
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a handle you can use if you want to create your own NoClogger device https://noclogger.com
This handle is designed to take a 1.6mm rod (the NoClogger version uses a 1.5mm rod).
You will need a 1.5mm to 1.6mm diameter rod, with the length depending on the length from the tip of your hotend to your filament insertion point. There is 1.5mm x 30mm deep hole in the design to make the insertion of the rod easier, but i heated my rod before inserting it to make it easier.
i printed this in ASA, with a brim but i don't think its needed.
Print orientation is as pictured.
just in case you are having a hard time sourcing your rod here's a link:
https://www.amazon.com/dp/B07KY8XJQL/?coliid=I132ULDJQS4F6A&colid=33BI8H756UJ6K&psc=1&ref_=lv_ov_lig_dp_it