GPU graphics card anti-sag support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is meant to eliminate sag on the free end of your graphics card
- Rating
- 5 / 5
- Likes
- 74
- Downloads
- 959
- Makes
- 3
- Views
- 4,222
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is meant to eliminate sag on the free end of your graphics card. The ones I found online were to flimsy for my taste so I made a bulkier assembly.
Start with the screw and loosely thread the nut onto it. Then add the sleeve and adjust the overall height. Once you are satisfied with the results, use the locking nut to fixate the sleeve.
The top should be printed in TPU and makes contact with the GPU itself.
Please keep in mind that I cannot take responsibility for any damages this causes on your computer, so use at your own risk.
Printed with 3 walls and 20% infill, no supports