GPU graphics card anti-sag support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is meant to eliminate sag on the free end of your graphics card
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 959
- Wydruki
- 3
- Wyświetlenia
- 4222
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is meant to eliminate sag on the free end of your graphics card. The ones I found online were to flimsy for my taste so I made a bulkier assembly.
Start with the screw and loosely thread the nut onto it. Then add the sleeve and adjust the overall height. Once you are satisfied with the results, use the locking nut to fixate the sleeve.
The top should be printed in TPU and makes contact with the GPU itself.
Please keep in mind that I cannot take responsibility for any damages this causes on your computer, so use at your own risk.
Printed with 3 walls and 20% infill, no supports