1 / 1
"Turtle" mITX SFF Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mITX case for your computer, designed to be used with a picoPSU or any clone of it.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 251
- Makes
- 2
- Views
- 2,610
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This case is meant to be used with a picoPSU or any clone of it.
It features an 8mm hole on the back for the power input port of the picoPSU, as well as a 12mm hole for a vandal power switch.
It also features VESA-75 and VESA-100 mounting holes so that you can mount it on the back of your monitor for a more compact system
Components required:
- 8 countersunk M3x6 screws (motherboard & top)
- 4 countersunk M3x9 screws (feet)
- 4 6mm motherboard standoffs
- 1 12mm vandal power switch
- 1 picoPSU of your required wattage