1 / 8
XTRKTR - Solder Fume Extractor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Behold the almighty XTRKTR. It mounts to the end of these nice soldering helps with a M4 screw pushed through the…
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 74
- Makes
- 1
- Views
- 1,050
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Behold the almighty XTRKTR. It mounts to the end of these nice soldering helps with a M4 screw pushed through the orange end-piece (you'll have to remove this to insert the screw..).
Between the honeycomb end and the fan is a space where you can put a piece of active charcoal filter mat.
- 40x40x56.3mm 12V server cooling fan (Nidec UltraFlo R40W12BS5AC-65) or similar
- Filter Mat cut off
- 2.5x5.5mm DC barrel plug socket (or just glue a cable into the hole) (mine is from RND connect)
- Mini power rocker switch 13.8x9.1mm panel hole
- some M4 screws or similar
While it's pretty noisy it really sucks the soldering fumes away from the face in a way that most commercial ones never did.
Category: Tools