1 / 5
Fishing V rod rest
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully functional 2 part print with thread for majority of fishing poles
- Rating
- 5 / 5
- Likes
- 80
- Downloads
- 400
- Makes
- 1
- Views
- 2,368
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is the basic fishing V front rod rest. It's made out 2 parts - rod rest with hexagonal hole and threaded insert that's glued into the hole. Thread is BSF 3/8 which is standart for fishing poles.
If you face some problems I recommend printing both pieces separately so thread is nice and smooth with print setting bellow.
Material should be for outdoor use. I used PETG. I recommend 0,2mm QUALITY profile in PrusaSlicer
Print recommendation:
Rod rest
- supports: yes
- nozzle and layer height - doesn't matter. I used 0,4mm nozzle and 0,2mm height
- perimeters: 3
- Infill: 25%
- print orientation: flat
Threaded insert
- supports: no
- nozzle: 0,4mm
- layer height: 0,2mm is Ok. I recommend 0,15mm height
- perimeters: 3
- Infill: 25%
- print orientation: standing
- brim: I recommend 2mm