External 3.5" HDD rack (UPDATED TO V2)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.22 – €3.93 net (excluding VAT)
For file: HDD Rack (V2)_0.4n_0.2mm_PETG_MK4IS_2h36m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.58 excluding VAT (range midpoint).
- Weight reported by the author
- 70 g
- Print time reported by the author
- 2.59 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Rack/stand for 4x 3.5" HDDs. Print one for each side. Now improved with suggestions from makes
- Rating
- 5 / 5
- Likes
- 183
- Downloads
- 1,082
- Makes
- 6
- Views
- 8,735
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Rack/stand for 4x 3.5" HDDs. Print one for each side. I used fairly standard hard drive screws, found in basically any computer hardware store.
I added a flattened version to print laying flat, inspired by BrewKnell's make, which shortens print time significantly.
After seeing unklfrsh, I got pulled back into this design once again, and decided to make a version with slots for zip ties.
As I noticed that very few things in the design file were constrained to anything, I decided to remake it from scratch. So here is that, Version 2!
I decided to keep the old versions, just for posterity.
Happy printing!