External 3.5" HDD rack (UPDATED TO V2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack/stand for 4x 3.5" HDDs. Print one for each side. Now improved with suggestions from makes
- Ocena
- 5 / 5
- Polubienia
- 183
- Pobrania
- 1082
- Wydruki
- 6
- Wyświetlenia
- 8726
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rack/stand for 4x 3.5" HDDs. Print one for each side. I used fairly standard hard drive screws, found in basically any computer hardware store.
I added a flattened version to print laying flat, inspired by BrewKnell's make, which shortens print time significantly.
After seeing unklfrsh, I got pulled back into this design once again, and decided to make a version with slots for zip ties.
As I noticed that very few things in the design file were constrained to anything, I decided to remake it from scratch. So here is that, Version 2!
I decided to keep the old versions, just for posterity.
Happy printing!