M3 t-nuts for MK3S+ T-Slot frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M3 t-nuts that fit the MK3S+ t-slot frame
- Rating
- 4 / 5
- Likes
- 38
- Downloads
- 240
- Makes
- 3
- Views
- 894
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Print and install, no disassemble needed :)
MK3S+ frame has a different shape and the current t-nuts models are too small, won't fit the frame.
This t-nuts fits a M3 nuts and M3 nyloc just fine.
Screw and plastic won't hold, a metal nuts will keep things in place.
It fits the frame like a glove, then I used a pliers to turn it 45 degree.
It will slide within the frame but won't turn no matter what without a pliers.
I didn't made one curved corner to avoid using pliers because the last thing you wanna when trying to remove it, is having this thing stuck.
That happens with the normal t-nuts with curved corners and isn't fun.
The sideways frame in the last pic, there are 2 each side holding it against the frame. It is rock solid.