1 / 3
M3 t-nuts for MK3S+ T-Slot frame — zdjęcie 1
1 / 3

M3 t-nuts for MK3S+ T-Slot frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M3 t-nuts that fit the MK3S+ t-slot frame

Ocena
4 / 5
Polubienia
38
Pobrania
240
Wydruki
3
Wyświetlenia
894
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Print and install, no disassemble needed :)

MK3S+ frame has a different shape and the current t-nuts models are too small, won't fit the frame.
This t-nuts fits a M3 nuts and M3 nyloc just fine. 
Screw and plastic won't hold, a metal nuts will keep things in place.

It fits the frame like a glove, then I used a pliers to turn it 45 degree.
It will slide within the frame but won't turn no matter what without a pliers.

I didn't made one curved corner to avoid using pliers because the last thing you wanna when trying to remove it, is having this thing stuck.
That happens with the normal t-nuts with curved corners and isn't fun.

The sideways frame in the last pic, there are 2 each side holding it against the frame. It is rock solid.

 

 

Tagi