Small hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small hinge for DIY projects
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 672
- Makes
- 2
- Views
- 2,127
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This small hinge is perfect for little DIY projects. It uses a piece of 1.75mm filament as the pin and is quick and easy to print. Can be mounted with M3 size bolts/screws or double-sided tape.
Print instructions:
Layer height: 0.2mm
Infill: 10-25%
Support: Depends on how clean your printer can print overhangs
Assembly instructions:
1. Make sure parts mesh well.
2. With the 2 halfs meshed, insert a piece of filament 35mm long into the hole as the pin.
3. Feel free to use a drop of super glue on the open side to secure the pin in place if it is loose.
4. Mount using an M3 bolt/screw. Double-sided tape works perfectly as well.