Cable Reel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in place Large Cable Reel. 200mm x 85mm Body made from 2 pieces + 1 Handle
- Rating
- 5 / 5
- Likes
- 57
- Downloads
- 335
- Makes
- 1
- Views
- 2,998
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Wanted to make a print in place large cable reel. Middle spinner is print in place.
To eliminate all supports I made body in two pieces plus a crank handle.
I was able to fit a 10m (30ft) #14 insulated extension cord. It was a tight fit so Id say 25ft max or longer with a smaller wire size.
Could be used for any cable/cord/string that fits. I have not tried but small Christmas lights should be able to fit as well.
I printed in white PLA (don't recommend white as it gets dirty fast), but should be fine to print in any any material you want.
0.6 nozzle.
3 perimeters (5 on crank posts)
Total print time: 16.5 h - about 450g of filament.
9h - Left body
6h - Right body
1.5h - Crank
Body and crank fit together quite nicely with no glue. Adding a bit of super glue on the post-slots would crate a solid single body.
0.2mm clearance on body connection and 0.4mm on crank.