Elastic substitute for Prusa Protective Face Shield RC2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a printable substitute for the elastic of the Prusa Protective Face Shield RC2. Revised to fit the i3 print bed.
- Rating
- 4.5 / 5
- Likes
- 0
- Downloads
- 236
- Makes
- 1
- Views
- 1,297
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Public Domain
This is a printable substitute for the elastic of the Prusa Protective Face Shield RC2. Revised to fit the i3 print bed.
-This strap may be useful in situations where there is excess printer time available and/or elastic is difficult or slow to source.
-This will fit six on a Prusa i3 bed
-It seems like it carries some nonzero hair tangling risk that the elastic strap does not. However, hair accessories resembling it are sold widely.
-Print time is about 35 minutes
-To model it, I took the arc length of the prusa headband and shrunk it by 20% The fit is snug but not tight.
-The holes have been smaller 3/22 and will be printed and tested 3/23 but I believe they should still fit with the facemask
Things I could develop if there is demand:
-Test fitting to different sizes of heads
-Optimization to print faster, use less material