1 / 4
weather station = anemometer + wing vane
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
weather station- anemometer + wing vane. Use two 608 bearings (most common type)
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 111
- Makes
- 2
- Views
- 1,445
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Hardware you need:
- 22 M5 X 20 mm bolts
- 2 Skate roller bearing (608 size)
- 2 bars 15 mm diameter. Minimum length 300 mm.
Support is designed for a 35 mm diameter pole.
Anemometer cups: glued to the rotor arms. Better to be printed upside down using supports, and brims.
Wind vane is split on two pieces to be glued, to fit small 3D printers.
