Shapeoko BitSetter low profile version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A low profile version of the bitsetter for the Shapeoko 3 as to allow for longer bits. Hardware/Parts needed to…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
A low profile version of the bitsetter for the Shapeoko 3 as to allow for longer bits.
Hardware/Parts needed to complete build:
5x M3 nuts
5x M3 20mm screws
1x 16mm Momentary Push Button (https://www.amazon.com/gp/product/B012I0GSR8/)
1x thin silicon wires
1x Touch probe plate (https://www.amazon.com/gp/product/B07TBRFQWQ/) or Shapeoko's official should work (I have not yet tested it with the Shapeoko one, but believe it to be same dimentions)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
25%
Filament: Polymaker Polyflex TPU Black
Notes:
I used Polyflex TPU, with tree supports with the camera mount printed on its side.
Print Speed of 20mm/s.
Category: 3D Printing