Counting matching models…
This is a model for a replacement part for the Festool Domino floating tenon tool that has presets that are more compatible with the common plywood thicknesses. The ½", 5/8" and ¾" nominal plywood thicknesses are actually typically…
Used to place small magnets with proper orientation. Hold slider down, attracts magnet, place in proper location, pull slider back, magnet is released. Can be used to place any size of small magnets. Recommended you print two to have one…
I have included two versions: Golf Tee Setter_No Multi Color: Just print this as normal, there is no need to split it into Parts. Golf Tee Setter_Multi Color: Split this into “Parts” or "Pieces", ( however your slicer defines it ). Then…
https://tormek.com/en/products/accessories/tts-100-turning-tool-setter Use setter for distance of tool bar and protrusion of tool from model. I use with: https://www.printables.com/model/1329063-svd-186r-tormek-sharpening-guide
This part (red in the image) holds the qidi hub lower, so that you have room to add a PTFE y-splitter without trimming the stock PTFE length or creating a sharper bend. This extra distance does increase the filament change time by 5-10…
My take on the ever popular tool to easily and accurately create rabbet and dados with a table saw, graduations added to each side for the estimated kerf and stock width, should just be used as a guide, this is 3d printing after all.…
Einfach zu bedienen ----- Einfach eine Reihe von Löchern bohren, in die Mitte des Stifts schieben und das Gelenk zusammendrücken. Der Punkt in der Mitte des Stifts markiert genau die Position des Lochs auf dem anderen Element. Breite…
Tool to check or reset the pin length for your calibration pin - Applicable to all Roland DWX Dental milling machines. To use: Insert your calibration pin with the stop ring until both bottom out (as in the photo). Tighten the stop ring…
With this tool you can easily place any sized magnet in the correct orientation. Bring the slider down, attract the magnet, place magnet in proper location and bring the slider back up releasing the magnet. Print two of these tools to…
This setter can be used on the precision shaft mounted to the chuck on the work piece without dismounting it from chuck (by right V groove on the setter) Print instructions nothing specific Additional parts Threaded inserts for mounting…
Für unsere Spielegruppe erstellter Pokal für den Jahresgesamtsieg in Siedler von Catan. gedruckt damals für das Jahr 2021, beigefügte Dateien 2023 - 2025 Wie immer Fusion Datei mit dabei. Feel free to remix
A resetter for the mijia thermometer after convert from bluetooth to zigbee With this tool you can easily resett the device and bring in to pairing more Just use a little piece of wire
I made this simple wick setter for those who make candles. The larger holes are 6mm in diameter, and the smaller inset holes are 3mm in diameter. Feed the wick through the larger holes and squish them into the smaller inset. The smaller…
A couple of four bar linkages and a rotary table to help me keep my heat sets vertical. You can find full build details here, along with the Fusion files (no paywall) And if you want more background on the design, you can find it here…
Simple low-profile bit setter. Print instructions Uses a Kailh Choc switch. Print case upright without supports. Print button face down. The model has the wire hole on the side instead of the front as shown. I moved it at the last minute…
Another customized silhouette handmade from the photo of Chess, a beautiful English Setter. Printing settings: Nozzle diameter: 0.4 mm Layer height: 0.25 mm Perimeters: 3 Top and bottom solid layers: 4…
Made to hold the entire set of Rivet setters from buckleguy. Used for leatherworking.
This is a simple stand to use the PG FUN CNC 3D Touch Probe as a tool setter. You will need the probe (which is relatively inexpensive), and the tool setter plate. You don't need the ‘ tool setter kit ’. All available from the same Amazon…
This a parametric model of a Angle Setting Block for chisels and plane blades. It is important to have consistent bevels on your blades and this setup block keeps your angles correct every time. Just line up the chisel or plane blade with…
English following. Pièce à ajouter aux embouts de drill pour visser du gypse sans le déchirer. Je l'ai désigné légèrement plus petit que l'embout Phillips afin qu'il ne bouge pas lorsque je visserai du gypse. Nécessite un marteau pour…
This is a modification to the original terrific box design, optimized to store specific small tool sets from Harbor Freight (see list). HF Warrior 9 piece SAE (inches) magnetic nutsetters 65806 HF Warrior 9 piece Metric magnetic…
Bang & Olufsen Penta speakers need midrange foam surrounds as part of their refurbishment. This simple tool just makes the job a bit easier. You set the foam or rubber surround on this for easy gluing, hold it steady and provides a hard…
Remixed to eliminate the battery and go back to the pogo pins (the wire-version was very fiddly). Also reduced the width to fit better in a cartridge of mine that was a bit tight, bumped up the height of the inner "rails" so that the Nano…
🐾 Irish Setter The Irish Setter is a graceful and energetic sporting breed known for its stunning red coat, joyful personality, and boundless enthusiasm. Originating in Ireland, this breed was developed as a hunting dog, prized for its…
All Spool Solution This board allows you to use filaments from other manufacturers. To use it you will have to mount the adapter on the machine using the two existing bolts, insert your old filament cartridge chip on the provided pen…
Měrka úhlu 15° pro broušení nožů apod. na bruskách Tormek, Scheppach a podobných s kotoučem ø200 mm. Pro výsledný úhel ostří 30°. 15° angle gauge for sharpening knives etc. on Tormek, Scheppach and similar grinders with a ø200 mm disc.…
This guide is designed to help you set rivets straight when using a Chinese rivet setter kit. There are other ways to make the process easier, such as adding an extra leather washer or trimming the rivet leg if it’s too long. However,…
These are printable base wads for pistol cartridge shotshells such as those using these shot caps: I tried these as an experiment to avoid the tedium of punching and setting heavy cardstock wads. They actually seem to work just fine, and…
new sleeves trap and suck in air! squash the new out of your sleeves to have a nice flat deck that won't float away! wow or curved foil foils
place it under the fep when tightening the screws before fitting to the main try. this will set the right amount of stretch needed when u tighten it all down, fits the saturn fine but should work with mars and other ones as well
Although there are loads of great magnet setting tools out there iv always had the issue of they can drag the magnet back out of the hole is the fit is a little loose, so i made this one you release the magnet you want to place by sliding…
Irish Setter Dog Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Dogs here: https://www.printables.com/@StudioMechanik/collections/2986065
Saddle rivet setters. Simple to use. Put the setters on both sides of the rivet and hit with a smaller hammer. Attention: Print with 100% infill!
I had some fitment issues using Wade Oler's bitsetter & probe holder on my 2015 Shapeoko 3, and decided to build one that would meet my design requirements: 30mm of height from by table surface to the top of the metal bar on the front of…
English Setter Dog Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Dogs here: https://www.printables.com/@StudioMechanik/collections/2986065
The nut setter tool is from Harbor Freight is super awesome, but not having the included inserts organized, especially after opening the bags, is not. These bins solve that. Includes a really small area to include a label. The bins will…
Scottish Setter Gordon Dog Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Dogs here: https://www.printables.com/@StudioMechanik/collections/2986065
Honeycomb storage wall holders for various sizes of tools with hexagonal handle such as punch, chisel, deburring tool and nail setter . Holds the tool securely. Tool can be easily picked from the holder. There are holders available for…
This is a height setter for the SuperPINDA probe on the Prusa MK3S/+. The shim height is equal to the thickness of the zip tie that Prusa includes in the MK3S/+ assembly kit when you purchase your printer. I've used it several times with…
Here it is in action: https://www.instagram.com/p/ByZaIv8HMVW/ This is a simple cup that fits over a Tormach Electronic Tool Setter. My setter lives in my machine, always connected. To keep it clean and in good operation I don't want…
I printed in TPU and it came out great. Currently in use since June 2021
This is a bearing 'setter' aka 'press tool' which I used to hammer new Campagnolo bearings onto my Ultra Torque 11sp Chorus cranks. I imagine this press will work for all (Record? Super Record? etc.) Campy Ultra Torque cranks. I used:…
This is a two-part holder to mount the Trendsetter jewellery practice wheels onto the Jura inside ring vise. It comes in two parts, both printable without supports. It slides in between the various gaps in a Trendsetter practice wheel to…
Pocket hole drill depth setter. These are great to throw into a tool bag and easier to use than the one in the Kit. I have to print another one since they seem to walk away out in the wild. I have my original on thingiverse. I use this…
I have access to a CNC-Mill at my university, but they lack a bitsetter for setting the tool height. So I thought let's try and create one on my 3D printer. Since I don't need a micrometer precision, this should be enough for setting all…
Wera 060422 Wera 060423 Wera 060425 Wera 060427 Wera 060428
A 3d printable version of the lathe tool height setter gauge found at https://littlemachineshop.com Quickly and easily check and adjust lathe tool bit height (adjust to center) Accepts any diameter work piece from 1/8" to 2 1/2" Use a…
You can mix your own Festool Green with Yellow to Cyan resins mixed at an 8 to 1 ratio.
This is a blank version of the weight for the Sunsetter keyboard. After the unfortunate events surrounding the Sunsetter R2 group buy, I saw a few people stuck without weights for their keyboard. I've recreated the weight based on the one…
Stencil for grading climbs. Thickness is 0.6mm. The stencilsmol file only has a-d and 0-9. The stencilbig file has a-d, 0-9, V, v, and a period.
This handy tool simplifies magnet insertion into 3D prints or any project where magnet placement in the correct orientation is crucial. Simply lower the slider, attract the magnet, position it, and raise the slider to release. Works with…
Use the following standard parts for build: 2x hexscrew M2x12mm 1x hex bolt M10x80mm Stainless Steel 1x brass tube Inner Diameter 10mm Outer Diameter 12mm, 20mm Length 1x microswitch How to: Cut the Hex bolt at 26mm under the Head Use a…
CNC 3D Probe tool setter stand for milo
American Lock pinning assist JIG follower and driver setter. Here is a video on YouTube to help see how this model works and how to use it properly. I hope this helps your pinning needs for locksport and locksmithing. I have a complete…
This angel English Setter memorial figurine was created as a gentle tribute to a beloved companion known for their affectionate nature, gentle presence, and unwavering devotion. The peaceful sleeping pose, softly sculpted angel wings, and…
A low profile version of the bitsetter for the Shapeoko 3 as to allow for longer bits. Hardware/Parts needed to complete build: 5x M3 nuts 5x M3 20mm screws 1x 16mm Momentary Push Button (https://www.amazon.com/gp/product/B012I0GSR8/) 1x…
The PGFUN DIY CNC Touch Probe has a toolsetter mod kit that turns the probe upside down and provides a nice 10mm surface for measuring tools. I had issues with reliability on the Long John toolsetter and this probe solved them all. It's…
Tool for driving cleanely a stearing race on your fork with a 1 1/8" stearer (30mm at the base). You don't need the striker if you don't care much about how long it lasts. I made it 219mm long so if you need a longer one, just stretch the…
Can be printed as multi-material or as single material. I printed in PETG.
Remix of... https://www.thingiverse.com/thing:2922204 ...to eliminate the battery and go back to the pogo pins (the wire-version was very fiddly). Also reduced the width to fit better in a cartridge of mine that was a bit tight, bumped up…
This is my first design on Tinkercad. I wanted a holder for my bitsetter on my Shapeoko cnc machine
A storage tray for the Veritas Bevel Setting Gauge, compatible with the Gridfinity system.
I have several Festool circular saws but usually set them to the same angles. I used to have an old block og wood where i cut my angles so i could quickly insert the saw and get the angles right. But that block is fixated to my work…
This bracket is for mounting the Somfy Eolis 3D RTS Wind Sensor to the rail of a Sunsetter awning. There is really no flat level surface on the Sunsetter awning rail to mount this sensor, plus I didn't want to drill holes in my rail. So,…
This is a fixture for holding ½" material and for setting the depth of dowels drilled on 32mm centers. The depth on the original model may be 5mm, but you will need to adjust the thickness of the base based on your needs. Fixture use:…
The file contains replacement knobs, and a replacement pin. The replacement pin is for the shorter screw. Use one M2 screw and nut for the short screw, and one M3 screw and nut for the long one. It is normal that the M3 head seats over…
Use this threaded mount to determine the distance between the sensor and the lens. Printed in PLA 0.12mm without supports for the thread
When my fibre service falls away, it does not always reconnect, and I have to power cycle the ONT and router to regain connection to the service provider. ESP8266 code to power cycle a router if three different website pings all fails.…
Height gauge to mount a pen at consistent height in a pen plotter. 1-4mm, 1x2 cm overall size.
Quick and dirty part to hold a cheryMX keyboard button to act as a bitsetter on my 4040 pro
🐾 Irish Setter The Irish Setter is an elegant, energetic sporting dog developed in Ireland as a gundog. It was bred to range widely across open country, locate game birds by scent, and then freeze or 'set' to show hunters where the birds…
Ersatzknöpfe für einen Botox Scene Setter, mit glatter statt gewölbter Druckfläche, so ist es einfach zu drucken. Replacement buttons for a Botox Scene Setter, with a smooth instead of curved printing surface, so it is easy to print.…
Gridfinity case to hold a Wiha TorqueVario Handle + Torque Setter, both new and old style handle. I needed a way to store my Wiha TorqueVario driver (item no. 28522) and bits (bit holder coming soon) in my Gridfinity system. I have tested…
Why I made this: I have been on a big Gridfinity tear. It's kind of a pain to install magnets one at a time while ensuring that you have the right polarity. This is a big-ass 6x6 jig that helps speed up the process. Why this is cool: This…
Use this threaded mount to determine the distance between the sensor and the lens. Printed in PLA 0.12mm without supports for the thread
This is a two-part holder to mount the Trendsetter jewellery practice wheels onto the Jura inside ring vise. It comes in two parts, both printable without supports. It slides in between the various gaps in a Trendsetter practice wheel to…
The file contains replacement knobs, and a replacement pin. The replacement pin is for the shorter screw. Use one M2 screw and nut for the short screw, and one M3 screw and nut for the long one. It is normal that the M3 head seats over…
A tool for setting a 10mm base standoff on pottery wheel thrown pots, designed for printing flat to achieve superior layer strength. Suitable for up to 190mm diameter With outer dimensions of 240mm and 120mm height. The base is set prior…
This part (red in the image) holds the qidi hub lower, so that you have room to add a PTFE y-splitter without trimming the stock PTFE length or creating a sharper bend. This extra distance does increase the filament change time by 5-10…
🐾 Irish Setter The Irish Setter is a graceful and energetic sporting breed known for its stunning red coat, joyful personality, and boundless enthusiasm. Originating in Ireland, this breed was developed as a hunting dog, prized for its…
When my fibre service falls away, it does not always reconnect, and I have to power cycle the ONT and router to regain connection to the service provider. ESP8266 code to power cycle a router if three different website pings all fails.…
PLA + CA (superglue) No supports No brim 2x the pusher and 2x the barrel Add magnets between pushers prior to gluing 6x2 and 5x4 magnets
This is a remix of a bit holder and a filled Gridfinity container. This is my first effort in designing in Tinkercad. Designed to accommodate the Dewalt 5 piece Nut Driver Set (DW2235IR).
Replacement Tool Setter Cap for Onefinity tool setter. Thread size is 8-32. Layer height: .15 (recommended) Works fine at .20 No Supports PLA, PETG, ABS, ASA all tested and work fine Printed version of the Tool Setter Cap are available on…
Need a replacement tool setter and didn't want to pay full price. Created this which uses a 12mm Momentary Metal Waterproof Push Button Switch Raised Head Amazon listing:…
I was debating even uploading this, but thought may as well. It's a very old setup and I no longer have it, but still may help someone else with the idea… I use this for my auto tool setter on my DIY CNC. This allows the tool grounding…
This is a connection for the Sunsetter extending awning, to allow anything to be connected to the end bar and to another point ie: a wall hook so that you install a curtain or extended shade when the sun changes position and the…
Purchased from Amazon https://a.co/d/9D4MPFx this stackable 3x2 gridfinity box hold the 4-Piece Nail Setter Punch and Center Punch Set, Heat Treated Alloy Steel with Knurled Grip Most Commonly Used Sizes for Carpenters.
The Precise Solution for Small-Scale Magnets If you frequently integrate small 4mm X 2mm magnets into your 3D prints for grid systems, modular parts, or electronics enclosures; you know the struggle: Magnets sticking to tools and fingers,…
A tool for setting a 10mm base standoff on pottery wheel thrown pots, designed for printing flat to achieve superior layer strength. Suitable for up to 190mm diameter With outer dimensions of 240mm and 120mm height. The base is set prior…
I modified the Automatic Tool Height Setter from AVID CNC so that it sits bellow the spoilboard instead of over it. Detailed instructions can be found here . This is just the plastic cover if you want to do the same modification.
This is a set of legs for a 1975 Brother PaceSetter sewing machine. The original legs broke and as you can imagine, parts are not readily available. I drew these up in Fusion 360 and I'm sharing them here in case someone else can use…
Keeps your watch hand pressers vertical. Current ID is 6.2mm, a little tight for 6mm OD setters, may need to drill out with a 6mm or even a ¼ inch drill bit (spinning in reverse works well for PETG) if you're having tolerance issues.…
This is a gridfinity storage for Biltemas Nail setter / driver. Link to buy the Driver pack: https://www.biltema.se/verktyg/handverktyg/drivdorn/dorn--korn--och-drivsats-6-st-2000024017 This is a contribution to Zack's gridfinity project:…
Just a simple tool to set 1 1/8" steerer tube crown bearing races. Needs a bit of 1.5" PVC pipe to give it enough length to clear the steerer tube. Little bit of clearance in the middle to keep it from binding, although in practice it…
Cookiecutter that looks like an English Setter. Can be scaled, but you should mind the walls getting thicker then.
made this to keep glass off the ground
This is sized to fit the common Warrior magnetic nut setters ( https://www.harborfreight.com/quick-release-magnetic-metric-nut-setter-set-9-piece-68519.html ) that a lot of people buy to go with the Icon mini ratchet set (…
anti slip box simple ¼ " 5/16" 3/8" Hex Nutsetter Drive Bits for Roof Screws number 2 Philips bit 89mm box long print for safety use raft if you cant trust you printer to stick can help with cad work if you like English or Dutch
