Harbor Freight Nut Setter Holder for Meme Icon Mini-Ratchet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is sized to fit the common Warrior magnetic nut setters (https://www.harborfreight.com/quick-release-magnetic-…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 26
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is sized to fit the common Warrior magnetic nut setters (https://www.harborfreight.com/quick-release-magnetic-metric-nut-setter-set-9-piece-68519.html) that a lot of people buy to go with the Icon mini ratchet set (https://www.harborfreight.com/locking-flex-head-ratchet-and-bit-set-35-piece-58074.html).
I recommend printing this perpendicular to the print bed. This is mainly because I made one side with cutaways so that you can flex the tab a little to fit the socket strip into it. If you print it parallel to the plate, you'll have the print sheer line in line with the stress if you're flexing it. This is just a recommendation, and if you're using thick layers and 100% infill, it probably wouldn't matter.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.28mm
Infill:
100%
Filament: Duramic PLA+ Black Post-Printing
Remove any supports you used (duh). The screw holes are sized for M3 socket head screws. You WILL need to drill two small holes into your case to fix the holder to it. Alternatively, you could use good double-sided tape or epoxy.
How I Designed This
Designed in OnShape in an evening with some calipers. Made to get the job done, not be pretty.
Custom Section
Need modifications?
Feel free to reach out if you need something customized and I'll see what I can do!
Category: Tool Holders & Boxes