Harbor Freight Nut Setter Holder for Meme Icon Mini-Ratchet

This is sized to fit the common Warrior magnetic nut setters (https://www.harborfreight.com/quick-release-magnetic-metric-nut-setter-set-9-piece-68519.html) that a lot of people buy to go with the Icon mini ratchet set (https://www.harborfreight.com/locking-flex-head-ratchet-and-bit-set-35-piece-58074.html).

I recommend printing this perpendicular to the print bed. This is mainly because I made one side with cutaways so that you can flex the tab a little to fit the socket strip into it. If you print it parallel to the plate, you'll have the print sheer line in line with the stress if you're flexing it. This is just a recommendation, and if you're using thick layers and 100% infill, it probably wouldn't matter.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

.28mm

Infill:

Filament: Duramic PLA+ Black Post-Printing

Remove any supports you used (duh). The screw holes are sized for M3 socket head screws. You WILL need to drill two small holes into your case to fix the holder to it. Alternatively, you could use good double-sided tape or epoxy.

How I Designed This

Designed in OnShape in an evening with some calipers. Made to get the job done, not be pretty.

Custom Section

Need modifications?

Category: Tool Holders & Boxes