SuperPINDA Height Setter (MK3S/+)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A height setter for the SuperPINDA probe on the Prusa MK3S/+
- Rating
- 4 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 1
- Views
- 107
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a height setter for the SuperPINDA probe on the Prusa MK3S/+. The shim height is equal to the thickness of the zip tie that Prusa includes in the MK3S/+ assembly kit when you purchase your printer. I've used it several times with very good results. Check the dimensions of your print if possible, but it should come out as expected if using PLA or another material that will hold its dimensional accuracy without post production modification. The height of the shim should be about 1mm when complete (see reference photos for clarification).
Also, the reference photos did not come out as clearly as expected but they get the message across. I've melted my E-axis assembly several times as well as crashing the probe and have reset it with this tool if that adds anything to its credibility. You can see the probe is slightly crooked but is still performing like it should.