1 / 5
Digital clock with mechanical 7-segment display units — image 1
1 / 5

Digital clock with mechanical 7-segment display units

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Digital clock with mechanical 7-segment display units This clock uses four mechanical 7-segment display units.

Rating
0 / 5
Likes
53
Downloads
88
Makes
1
Views
3,058
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Digital clock with mechanical 7-segment display units

Video

How to make

You need

(other micro controllers can be used if it can handle 4 servos)

How to make
  • Assemble 4 display units. Follow the instructions at https://www.thingiverse.com/thing:5066794
  • Attach display units to the base, using 2mm tapping screws
  • Fix the top of the neighboring display units using retainer.stl and screws
  • Attach Ks0360 board to the bottom of the base
  • Insert micro:bit to Ks0360 board
  • Set rear covers (print two instances)

Adjustments of the position of the servos

### offset adjustment

  • visit the site at https://makecode.microbit.org/ and upload check-offset2.hex
  • fill the "offmap" table with zeros
  • download the editted .hex file from the micro:bit site and flash it to the micro:bit board
  • Find the best offset values. A/B button increases / decreases the offset value. Press A and B buttons simultaneously to increase the number to be shown (0-9).
  • Write down the found offset values to the source code and check again.

using clock code

  • upload clock.hex to micro:bit site
  • Copy the offmap table from check-offset2.hex to clock.hex
  • download the .hex file and flash it to the micro:bit

Category: Gadgets

Tags