FPV Micro Quad Racing Gates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Build your own indoor FPV gates or pylons. Just print out the base parts, one or more connectors.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 26
- Makes
- 0
- Views
- 507
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Build your own indoor racing air gates or pylons. Just print out the base parts, one or more connectors, and buy some 1/2" pipe insulation from your local home improvement store.
You can use a string to keep the gate feet together. Optionally you can also tape them down using some painter's masking tape.
I've included the OpenSCAD file in case you need to adjust the dimensions for your pipe insulation.
I used colored duct tape to give them a bit of flair and make them easier to see when flying FPV.
Post-Printing
Follow photos
Just add 1/2" pipe insulation and colored tape. I used two pieced with a single connector for my gates, but you can make them larger or smaller if you wish.
How I Designed This:
OpenSCAD
OpenSCAD file is included for your modifications.
Category: R/C Vehicles