Square Tool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.27 – €3.99 net (excluding VAT)
For file: vg_st_d_square_tool_v1_02mm_pla_mk2s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.63 excluding VAT (range midpoint).
- Weight reported by the author
- 45 g
- Print time reported by the author
- 3.65 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
You always need to be sure your project is square. This tool can help you and you also have 4 rulers inside.
- Rating
- 4.6 / 5
- Likes
- 124
- Downloads
- 876
- Makes
- 6
- Views
- 3,221
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
You always need to be sure your project is square. This tool can help you and you also have 4 rulers inside.
Check technical drawing i did so you can see this tool dimensions!
Print instructions
Technically you can use printing settings of your choice and also the material you like.
NB! Use "Detect thin walls" So every millimeter line will be printed!
It's 0.4 mm wide so a normal 0.4mm nozzle is abble to print it!
I printed this using a standart PLA ( Elegoo )
Layer height - 0,2 mm
HotEnd - 200C°
Bed - 55C°
Infill - 10%
NB! Use "Detect thin walls"
The rest is practically the same Prusa Slic3r Settings.
Ask me if you have problems!