Suction Cup Phone Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach any smooth surfaced device to a ¼-20 thread using suction cups and heat-set threaded insert. Prints in an hour.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Needed a way to mount a phone by its screen for an unobstructed view of the back. Uses 3x suction cups to hold device while providing a ¼-20 threaded insert to mount to just about any tripod, magic arm, or basic photography mount that uses the industry-standard ¼-20 thread.
Hardware you'll need:
3x M6 hex nuts
1x heat-set ¼-20 threaded insert.
3x strong suction cups with attached M6 bolt.
Nuts are embedded in the print by inserting a pause on layer 37 and placing the nuts in the print, then resume to finish.
You shouldn't need any supports or post-processing. Just make sure the threads are clear.
Printed in Overture Matte-Black PLA
https://www.amazon.com/OVERTURE-Filament-Printer-Dimensional-Accuracy/dp/B089S2QDHD
Suction cups used:
https://www.amazon.com/dp/B07RRYJYMY
Threaded inserts used
https://www.amazon.com/gp/product/B08PVQX853
Soldering Iron used
https://www.amazon.com/gp/product/B00ANZRT4M
Heat-set tips for soldering iron
https://www.amazon.com/gp/product/B08B17VQLD