Suction Cup Phone Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach any smooth surfaced device to a ¼-20 thread using suction cups and heat-set threaded insert. Prints in an hour.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Needed a way to mount a phone by its screen for an unobstructed view of the back. Uses 3x suction cups to hold device while providing a ¼-20 threaded insert to mount to just about any tripod, magic arm, or basic photography mount that uses the industry-standard ¼-20 thread.
Hardware you'll need:
3x M6 hex nuts
1x heat-set ¼-20 threaded insert.
3x strong suction cups with attached M6 bolt.
Nuts are embedded in the print by inserting a pause on layer 37 and placing the nuts in the print, then resume to finish.
You shouldn't need any supports or post-processing. Just make sure the threads are clear.
Printed in Overture Matte-Black PLA
https://www.amazon.com/OVERTURE-Filament-Printer-Dimensional-Accuracy/dp/B089S2QDHD
Suction cups used:
https://www.amazon.com/dp/B07RRYJYMY
Threaded inserts used
https://www.amazon.com/gp/product/B08PVQX853
Soldering Iron used
https://www.amazon.com/gp/product/B00ANZRT4M
Heat-set tips for soldering iron
https://www.amazon.com/gp/product/B08B17VQLD