1 / 3
👷♂️ Lego man - Bike valve cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air valve cap - for your MTB or motorbike or car..
- Rating
- 0 / 5
- Likes
- 127
- Downloads
- 299
- Makes
- 0
- Views
- 1,896
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Info:
- another model for valve cap - Lego man this time
Not for presta valve!
Print instructions:
- 0.4mm nozzle works good for me (for my MTB valve), so just print this at 100% scale or adjust slightly.
- body 3mf file contains variable layer height, bottom part must be 0.05 layer height so the thread works well
- so because of 0.05 layer height this is recommended to be printed separately
- also print probably separately:
- body + arms in one color of your choice, so his shirt color match sleeves
- hands + head are usually yellow
- OPTIONAL: eyes black (0.05 layer height)
- little supports are only for arms needed, because of arm joint support
Assembly:
- glue eyes on the head
- put things together - you will probably need to use sand paper/razor knife to cut some parts (brim connections, arm joint support which will be exceeding probably from the joint)