Funnel for 54mm Breville Bambino Plus Portafilter - Fits Smartgrinder Pro Cradle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I could not find a dosing funnel for my Breville Bambino Plus 54mm Portafilter (PF) which fits into the PF holder of…
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 251
- Makes
- 6
- Views
- 1,732
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I could not find a dosing funnel for my Breville Bambino Plus 54mm Portafilter (PF) which fits into the PF holder of my Smart Grinder Pro. The ones I have tried are too tall so I had to tilt the PF forward a little just so it goes through the cradle slot to reach the on/off activation switch, and the bottom spout hits the grinder tray. So I made my own funnel from scratch in fusion 360, though inspired by other's design like DogsBollocks and DrawnToDigital.
I used clear PETG at 20% infill so the infill lines are visible as shown in the photos.
PETG is preferred over PLA for food safety.
0.4 nozzle
0.2 Layer height
Supports: Yes
Place bottom side up in the bed for cleaner prints.
Category: Kitchen & Dining