SK-Tank Carriage Strain Relief Taller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slightly taller version of the carriage strain relief in case you use a different extruder that requires it.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I upgraded the extruder on my SK-Tank to an LGX and now the motor hits the strain relief. I quickly spliced in another ~10mm of length to this to make it taller.
Retains the same 3 spots for zip-ties from the original. Mounts with a single button-head or countersunk M3x10mm. Recommend you use a nyloc nut with a washer on the part that touches the plastic.
I would print this in something very rigid and like 100% infill to give the greatest stiffness possible. I'm trying 100% ASA and I will go to PA-CF if that's not stiff enough.