SK-Tank Carriage Strain Relief Taller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slightly taller version of the carriage strain relief in case you use a different extruder that requires it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I upgraded the extruder on my SK-Tank to an LGX and now the motor hits the strain relief. I quickly spliced in another ~10mm of length to this to make it taller.
Retains the same 3 spots for zip-ties from the original. Mounts with a single button-head or countersunk M3x10mm. Recommend you use a nyloc nut with a washer on the part that touches the plastic.
I would print this in something very rigid and like 100% infill to give the greatest stiffness possible. I'm trying 100% ASA and I will go to PA-CF if that's not stiff enough.