1 / 1
Weed Spray, No Dogs Yard Sign
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yard sign to help keep dogs off after you've sprayed weeds (or haven't and just want to keep them away!)
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 40
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
See this model if you want a quick test print for the letters.
If you don't know how to print in two colors on your non-MMU PRUSA:
Printer Settings
- General
- Extruders: 2 (or more for more colors)
- Extruder 1 (or whichever extruder(s) use the first layer but aren't the first extruder to place filament)
- Lift Z: 0.3 (layer height + 0.1mm)
- Lift z enforcement: Enforce on first layer
- Custom G-Code
- Tool change G-code: M600
Print Settings
- Skirt and Brim
- Loops: Set to # of layers that have different colors (if 2 colors goes 0.4mm up and you're printing at 0.2mm layer height, use 3 loops)
- Skirt height: Same as above
- Multiple extruders
- Wipe tower: disable
Slicer Setup
- Import
BlackWeedSpray.stlinto PrusaSlicer - Right-click on it in the right pane and select "Add Part > Load"
- Select
WhiteWeedSpray.stl - Ensure the component (and parts) are flipped so that the appropriate side is face-down
- Ensure settings above are used
- Right click each part in the right pane and select "Change extruder" and select the appropriate one
- Inspect the "Gcode preview" and note which color prints first
- Export the
.stland then edit it with a text editor - Remove the first
M600command if your printer is already set with the appropriate first color - Start printing and swap colors as necessary