1 / 1

Weed Spray, No Dogs Yard Sign

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yard sign to help keep dogs off after you've sprayed weeds (or haven't and just want to keep them away!)

Aktualizacja u źródła: 28 sie 2022

Informacje o modelu

If you don't know how to print in two colors on your non-MMU PRUSA:

Printer Settings

General
- Extruders: 2 (or more for more colors)
Extruder 1 (or whichever extruder(s) use the first layer but aren't the first extruder to place filament)
- Lift Z: 0.3 (layer height + 0.1mm)
- Lift z enforcement: Enforce on first layer
Custom G-Code
- Tool change G-code: M600

Print Settings

Skirt and Brim
- Loops: Set to # of layers that have different colors (if 2 colors goes 0.4mm up and you're printing at 0.2mm layer height, use 3 loops)
- Skirt height: Same as above
Multiple extruders
- Wipe tower: disable

Slicer Setup

Import BlackWeedSpray.stl into PrusaSlicer
Right-click on it in the right pane and select "Add Part > Load"
Select WhiteWeedSpray.stl
Ensure the component (and parts) are flipped so that the appropriate side is face-down
Ensure settings above are used
Right click each part in the right pane and select "Change extruder" and select the appropriate one
Inspect the "Gcode preview" and note which color prints first
Export the .stl and then edit it with a text editor
Remove the first M600 command if your printer is already set with the appropriate first color
Start printing and swap colors as necessary