Drownyard Temple Deck Box (MTG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100 card MTG deck box for Commander, that looks like a whisky barrel
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 27
- Makes
- 0
- Views
- 569
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
An ominous wind blow across Nephalia. The air is tick with the smell of rancid fish. Cultist’s muter incoherently as they wander the streets. Something strange is happening down by the water.
Welcome to the Drownyard Temple, beware what lurks Through the Breach.
This deck box can hold 100 double sleeved cards with extra space for tokens. It also a compartment at the bottom for dice and other small accessories.
Notes:
- Supports and optionally a raft are needed for part1 but the others do not require it. Additionally, part 3 looks better if printed with a smaller layer height of around .12m
- These parts have a nominal interlocking clearance of .10mm. This fit is intentionally a little tight. Due to this it is necessary for your printer to be properly calibrated for dimensional accuracy.
Assembly
First: Begin by lightly sanding the bottom on the bottom of part 1, and the top of part 4.
Then: Test the fit up. Part 4 has pins on the top and part 1 has small holes on the bottom features to help to align them properly.
Next: Apply a thin layer of glue (I used superglue) to the surfaces, and press the parts together.
Last: Do the same for the joint between parts 2 and 3.