1 / 6
Sheath with holes for treaded inserts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Store your chef knifes by bolting this case to a stand or any other surface with M4 bolts.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 580
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This version of sheath holds my chef knifes of up to 8 3/8 inches (216 mm) blade length.
Requires M4x8x6 thread inserts, M4 bolts (2 of each per case) and a soldering iron for the assembly.
The distance between the holes for the inserts is 50 mm on center.
Assembly:
- Print one or more case and an optional stand
- Sink the inserts into preset holes by heating them with a soldering iron
- Attach sheath to a surface or the stand with M4 bolts of required length (use 12mm for the stand)