Filament Swatch with Printer Tests!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep track of all your filaments while also testing and fine-tuning them!
- Rating
- 4.939 / 5
- Likes
- 472
- Downloads
- 2,024
- Makes
- 44
- Views
- 10,712
- Reviews
- 33
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
Introducing the ultimate filament test swatch!
This little print covers all the basics for printer testing, as well as being a convenient filament test swatch, all with a place for a label and hole for a keyring. The label is sized for a standard address label (Avery 5160 or 5260) sticker you can get at most stores that sell stationary, or on Amazon HERE. This is a remix from this thingiverse design (also on Printables HERE), however I remodeled from scratch to make various changes. I changed the length to fit the labels, and modified the transparency thickness, small features, the keyring hole, stringing, and a few others features. See the Mini version with the same tests HERE!
Here is a list of all the tests included in this part, with pictures of each one below.
- Overall dimensions
- Small holes (1mm, 2mm, 3mm, 4mm)
- Small Posts (1mm, 2mm, 3mm)
- Smooth surfaces / slopes
- Sharp inside corners
- Sharp outside corners
- Stringing
- Bridging (20mm, 15mm, 10mm, 5mm)
- Transparency (0.1mm, 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm, 1.5mm, 2mm)
- Overhangs (25°, 35°, 45°, 60°)
- Thin gaps (0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm, 1.5mm)
- Thin walls (0.5mm, 1mm, 1.5mm, 2mm, 2.5mm)
Don't forget to look at the Troubleshooting Guide to fix the issues you discover!
Happy Printing!
- Ty10y
