Filament Swatch with Printer Tests!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep track of all your filaments while also testing and fine-tuning them!
- Ocena
- 4,939 / 5
- Polubienia
- 472
- Pobrania
- 2024
- Wydruki
- 44
- Wyświetlenia
- 10 712
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
Introducing the ultimate filament test swatch!
This little print covers all the basics for printer testing, as well as being a convenient filament test swatch, all with a place for a label and hole for a keyring. The label is sized for a standard address label (Avery 5160 or 5260) sticker you can get at most stores that sell stationary, or on Amazon HERE. This is a remix from this thingiverse design (also on Printables HERE), however I remodeled from scratch to make various changes. I changed the length to fit the labels, and modified the transparency thickness, small features, the keyring hole, stringing, and a few others features. See the Mini version with the same tests HERE!
Here is a list of all the tests included in this part, with pictures of each one below.
- Overall dimensions
- Small holes (1mm, 2mm, 3mm, 4mm)
- Small Posts (1mm, 2mm, 3mm)
- Smooth surfaces / slopes
- Sharp inside corners
- Sharp outside corners
- Stringing
- Bridging (20mm, 15mm, 10mm, 5mm)
- Transparency (0.1mm, 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm, 1.5mm, 2mm)
- Overhangs (25°, 35°, 45°, 60°)
- Thin gaps (0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm, 1.5mm)
- Thin walls (0.5mm, 1mm, 1.5mm, 2mm, 2.5mm)
Don't forget to look at the Troubleshooting Guide to fix the issues you discover!
Happy Printing!
- Ty10y
