1 / 1
Anycubic Kossel Plus Bed holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
240mm diameter bed holder for Anycubic Linear plus, prevents the round glass plate from rotating while printing.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 77
- Makes
- 0
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Reposted from my thingiverse account @hazmatt17
Heated bed clamp to prevent it from rotating during printing.
Print using a heat safe material such as ABS or PETG.
Additional Hardware required:
(6) M4 - 10mm bolts (same size that the printer is built with)
(6) M4 Nuts (bracket is designed for the rectangular nuts that came with the printer, but WILL FIT regular M4 Hex Nuts)
REVISION NOTES:
AKLP_BedClamp_Base_REV1: Removed slot on mount and replaced with regular hole.