FLsun Q5 Toolbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A toolbox to attach to the top of your FLsun Q5. Back out one of the top screws and use it to hold it in place.
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 210
- Makes
- 1
- Views
- 1,039
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a remix of jsn079's toolbox. (Can't mark it as a remix since the original was posted on Thingiverse, sorry jsn079) I've enlarged the diameter of the bolt hole, as well as lowered the lip the head of the bolt sits on. His was way too small and high for my FLSUN Q5.
I've also added a slot for the small wrench to fit in, as well as several additional holes for the Allen wrenches and flathead screw driver to fit in. Had to resize the Micro SD Card Reader's slot as the original had no chance of ever fitting the Micro SD Card Reader that FLSUN provided with my printer.
Full credit to the original design goes to jsn079, thanks for the wonderful overall design of the toolbox.
Print Settings
Layer Height: 0.2mm
Infill: 25%
Supports: yes (on the mounting piece)
Not sure why the model will sometime import on its side, just make sure you rotate it so the base is on the build plate.
Must be printed with supports for the lip that attaches to your Q5. Just enable "Support on build plate only" option.
I also suggest using 25% infill to increase the strength of the columns on the front. I found 10% to be too easy to break on test prints.