244 models
The R2D2 kit Card has a multicolor and a single color print and is print in place! The R2Q5 is a Multicolor only and is also print in place you should use supports for both!
AA Rear shell is here! USBC Rear shell is here! This model is designed specifically for the Funny Playing IPS screen mods. PRINTING: I have had successful prints with 0.4mm and 0.6mm nozzles at 0.2mm layer height with PLA, PETG, and ABS.…
This is a multicolor only evil version of R2D2 R2Q5! Prints with supports on any multicolor printer colors are red, silver, and black! THIS IS THE SEQUAL TO R2D2 KIT CARD!
Mount four 3.5 inch hdd on a 140 mm fan mount. The extra 8 holes are for stability and works on Coolermaster Q300L and Q500L cases. Ender 3 v2 0.6 nozzle PETG Category: Computer
AA Rear shell is here! USBC Rear shell is here! This model is designed specifically for the Funny Playing IPS screen mods. PRINTING: I have had successful prints with 0.4mm and 0.6mm nozzles at 0.2mm layer height with PLA, PETG, and ABS.…
Because my printer has a small print bed, I need a smaller base tile. What is the best shape to use? I think a different shape may be better than the original square shape of the tile. After some prints i refuse to use this system bc its…
Really enjoy Lopatka's design, but found it a bit too long. Gave it a little trim while keeping his name intact.
This things helps damp vibration (better ghosting and ringing on print) of Flsun Q5 arms with two springs every two arms (like SR model), one on tower side and the other hotend side. There is two different design, up and down. the correct…
this is the definitive fan duct for your flsun Q5 , for all fan that you adopt , more restricted tolerances for a sure insert e and a best 270 degrees flow angle with 55 degrees of deviation. i recommend to use PETG or better materials,…
Update 1/17/23: New texture files resized to 2048px. This size fixes a bug in Prusa Slicer and SuperSlicer that makes textures black in the preview window. This is a custom model and bed texture for the FLSUN Q5. This set works with Prusa…
Bed Level Test for FLSUN Super Racer and Q5 with or without label 240mm external diameter for SR 180mm external diameter for Q5 0.6mm thick. Scale Z if you want other thickness
This is a remix of jsn079's toolbox . (Can't mark it as a remix since the original was posted on Thingiverse, sorry jsn079) I've enlarged the diameter of the bolt hole, as well as lowered the lip the head of the bolt sits on. His was way…
Hier ist der PDP PRO kompatible Magazinboden. Einfach gegen den standard Boden tauschen und schon passen die günstigeren Magazine in eure Pro Version. Eignet sich auch super zum Personalisieren um die Magazine auf Wettkämpfen euch…
Gedruckt habe ich es aus schwarzem PLA. Hochkant mit Unterstützung.
recommented material : PETG This case is also available with all leveling sensor of Flsun
Idea A simple way to secure the tripod legs with velcro straps because they always tend to flop around uncontrollably. Design This is my first design done in Fusion 360. The original design I used as a reference had lots of supports to…
Throw lever for the focus on a Hikmicro SQ50L 3.0 scope, might also fit others with focus ring size around 69mm You will aslo need a m3 screw and nut I printed this in PETG, but TPU is probably better
Some spare HDD mounting rails compatible with Q510, Q520, Q910 and Q920 of the Fujitsu ESPRIMO Q-Series which are commonly available here or here . Spare part number: C26361-K1011-C40-*-Y369 Print without support in PETG or ASA at 0.2mm…
The effector plate for a Flsun Q5 is quite large and heavy, so I came up with these designs. The effector uses a 5015 radial blower fan as part cooling fan. 2 effector plate designs ( I prefer and use the V2 ) Multiple fan duct sizes…
Adapting EQ5 (SkyWatcher) telescope mount or similar types to OnStep goto controller , by Howard Dutton project. Accessories recommended OnStep Mini 2.0 Cotroller and Box on base MiniPCB2 and Teensy3.2 or OnStep STM32 Controller and Box…
Hallo zusammen, dies ist ein Leveltest für den FLSUN Q5. Der Außendurchmesser beträgt 180 mm. Dieser Test muss mit einer Layerhöhe von 0.2 mm gedruckt werden. Optimiert ist er für den Druck mit einer 0.4 mm Düse. Es werden 2 Schichten für…
Easy way to mount Power Supplies, Small PCs, Focuser Controllers, Dew Heater Controllers or anything with a flat side. Print vertically for extra strength around the clamping face, using 15% infill with PETG. Will work on tripod legs…
An easy to use, lightweight, swappable cooling duct system with different attachments. Once the top latch is mounted below the radial fan, it is very easy to swap out different attachments by sliding them on and off from the top part.…
Remix of original project to get it to fit my Nema17 motors. Extended the length of the mounts and added support to the ethernet breakout board I used for connection so it sits snug without moving about. Used together with GT2 pulleys 12T…
needed: 6x M3x10 screws; 3x M4x15 screws; 3x M4 nuts 6x 2020 m3 tnuts (you can print them and incorporate 6x M3 nuts) watch my profile to find them!!! print with a rigid material
Please, upload your printed parts here, i would like to see your prints. FLSun Extruder on side of the printer, for less vibration and for easy filament path. Made for Q5, for stock extruder holder for side of the printer, for shortening…
Simple shape made of concentric circles, with a width of 0.4mm and a height of 0.2mm. If printed with these settings, it will print single layer circles. Which makes it easier to spot regions where you might have a warped bed.
My new version of FLsun Q5 Direct Drive -printed adapter and screw -2x M3 threaded inserts 1. melt threaded inserts in adapter 2. unscrew Bowden adapter on coldend 2. put on adapter 3. insert printed screw 4. cut Bowden Tube to size 5.…
This is Mellow Fly-ADXL345 USB Accelerometer holder made for my Flsun SR. It may work with Flsun Q5 and Flsun V400 too. Prints without supports (with bridges). To mount it, you will need: two M3 screws with nuts (I used plastic ones so it…
needed parts: 6x tnuts for 20x20 profile; 3x M4x15 (for the base) ; 6x M3x15 (for 20x20 profiles) i used PETG for my prints
Type A is the version without a barrier. Type B is the version with a mid-section barrier. Printing without support ABS and PETG are recommended, but I printed it with PLA. ----------02.01.2024 update note---------- I've addressed some…
UPDATE 2: Increased the size of the counter screw hole and around the hotend mounting groove to fit M3 insets. Old files for self-cutting screws still online. These may need some re-tightening every couple dozen hours of printing. UPDATE:…
⚠ For v4 kit only ⚠ This is one of my first creations, i wanted to attach my onstep controller to the tripod's legs. Print on the orientation shown in the picture. I printed mine using PETG line height: 0.2mm no supports (but you can try…
07/01/23 added a new fan duct for more air flow ( perfect for 5015 ) [fan duct v2] 03/01/2023 i added a new version of 5015 fan duct that you can use with original cage recommended material : PETG or ABS or ASA you need: 1x 5015 fan 1x…
A little tray to fit the corners of a FLSun Q5 fits to the edge and avoids foot screw Print Settings Printer: FLSUN Q5 Rafts: No Supports: No Resolution: 0.2 Filament: Giant Arm PLA white Notes: Wall count of 2 3 base layers Category: 3D…
This is a stand I designed for the Esprimo Q556 tiny PC from Fujitsu. I've had a few clients get these machines ex-lease and they often don't come with their 'foot' this is designed to be fitted on without any screws or mounting hardware.…
V3 : position of holes are corrected , more mesh issues are corrected, more thight clearances from the heatsink V2 (13-01-2025) : improved geometry, added new M3 insert for hotend fan screws, clearances corrected all the components that…
Parts: * 3x * MGN12H linear rails: 400mm - 470mm M3 T-Nuts and screws for rails * 6x * M3 x 6mm (or 8mm with washer) * 3x * q5_linear_rails_mod.stl * 6x * gt2_clip.stl
This is the spool holder I made for my Flsun Q5. only four 608 bearings needed; stock screws and holes used; no additional screws needed for assembly and mounting; took me about 5 hours to print (40 mm/s, 0,3 mm layer); there is mount for…
Mini Libra Extruder adapter for FLSUN SR Use three M3 countersunk screw to join the two parts and two M3 screws with inserted nuts for the mini libra extruder. Cut a piece of ptfe tube to guide the filament to the hotend (all metal or…
A very simple and low profile feet for increase stability thaks to large support surface for Flsun Q5. One file (Flsun Q5 foot) for Y an Z tower, the other (Flsun Q5 cable foot) for X tower to leave space for bed cable. For mounting you…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings Notes: I recommend to do a color change by script at height 2.50mm and use a prime pillar Category: Keychains
This is just a very simple pad you can put under your tripod legs to protect your floor from the metal studs.
Idea This model's idea is a rebuilt and (hopefully) improved version of: https://www.thingiverse.com/thing:3964197 While I liked the original model and for this version used most of its measurements, I had a few issues with it and even my…
This GPS mounting bracket includes a strap to more securely hold the GPS module. Great for Drone or other uses where the GPS module could fall out. It also provides some isolation for the modlue from the chassis of the vehicle. Designed…
Hallo zusammen, ich habe für den FLSUN Q5 eine Aufnahme für den Levelsensor konstruiert. Somit kann man diesen vernünftig verstauen. Ihr könnt die Originalschrauben verwenden. Folgt mir gerne auf Instagram: @3ddruckbude…
If it clicks the charger sits.
Remix of Wuggi's excellent EQ5/HEQ5 tripod leg transport clip to print it without supports. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable Infill: 10 Filament: C-Tech PETG Notes:…
A mount system for the FLSun Q5 for cameras using 1/4-20 UNC threaded mounts. I haven't had any luck finding one, so I cobbled this together from parts of a few different models. You'll need: 3 M5 x 20 bolts 3 M5 hex nuts Everything…
The 2018 Audi Q5 has a little nook, just above the radio presets. Cards and little items keep falling out when I take sharp turns, so I made a little tray to remedy that problem. It's not perfect but it works. Might fit other years and…
Simple print that fits over the original spool holder. No supports needed if printed standing upright.
Standard manual adjustment knobs from skywatcher are crap that breaks as soon as you apply some force to it, so I've designed a better one that has snug fit from the beginning and then it also allows for a lockdown with a m3 bolt screwed…
For travel and transportation I put my EQ5 tripod in a slightly padded tripod bag. After a few flights, I saw that the pin on top of the tripod had damaged the bag from the inside. This cover protects the tripod top and the bag. It it…
Reccomend printing in ABS/ASA or any other heat resistant and stiff material 0.2 layer height 50% infill (cubic or gyroid) 4-5 walls (can also add alternate extra wall for added stiffness) Requires 6xM3 heat inserts for connections to…
Made a remix to fit with the PoleMaster HEQ5 adapter for quick and easy removal.
Hier eine kleine zusätzliche Ablage für das Fach unter der Armlehne. Für Kia Sportage NQ5 BJ. 2021 bis 2025 Mich hatte es gestört das es das nicht mehr wie beim Sportage 3 gibt. Perfekt für Kleinteile. Mit separatem Fach für Münzen. Ist…
Remix of PrinterPro's Wyze camera mount.
Toolbox for 3D Printer Tools with Flsun Logo + Flsun Super Racer Logo Flsun Q5 Logo Flsun QQS-PRO Flsun V400 MakerWorld : https://makerworld.com/en/@sweb3791 My Models : https://www.printables.com/de/@CB_384764/models
Baseus power bank bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/7fbQGof 20000mAh 65W or another powerbank with max. size of 65 x 27 mm Happy printing!
EN VW Golf - Polo - Passat AUDI A3 - A4 - A6 - Q3 -Q5 - TT Windscreen mirror wire protection - cover - cap 3C8857593B The provided .Step file allow you to modify the length of your cover to perfect fit to your car, as your broken part is.…
This is my first version of spool holder for Flsun Q5. I don't use it now because I designed horizontal spool holder witch i like better. This one uses four 608 bearings for wheels, everything else is printed. Works with small…
HEQ-5 Tripod Adapter With this adapter you get a 1/4" or with a thread adapter 3/8" camera thread on a HEQ-5 tripod. I use it for astrophotography and screw an Omegon polar wedge on it. The adapter is 2 pieces, the bottom piece includes…
Use cases : This is my creation of a grain tank extension for a SIEMENS EQ500 machine. With this addition you can put up to 1kg of coffee in the machine. Impression : PETG for food contact. Please give this design a like if you like it,…
This is the baseplate, reverse designed thru my Q5 Project. I does cnc-mill this this with Aluminium for less weight and better thermals. There is a STEP-File for engineering. See my Work here: https://youtu.be/03k-3chBYmc
The holder is for a 100mm long 24V LED strip with a switch. The rocker switch has 8.2x14.7 mm on the mount. I branched off the 24V at the main board fan. The cables are routed upwards in the V-profile and held in place with V-slot strips.…
Quick and dirty mount to fit a Omron TL-Q5MC2 probe (or similar square clone like Vorons use) onto the BL-Touch mount point on a CR10-V2. Requires you to have a spring steel flex plate to work well but more reliable than the BL-Touch.…
This is mount I designed for ADXL345 to measure resonances and calibrate the input shaper in Klipper firmware, that I use on my Flsun Q5 printer. The accelerometer axis is aligned with the printer axis. Printed flat side down without…
designed to mount an mgn12h carriage and rail on the outside of the extruded supports which allows you to keep the original dimensional relationships between the parts. you should not have to change anything in your firmware. i used 400mm…
Replacement for the part were camera slides onto the copter. For the clip, just heat it carefully with a lighter and bend it just a little. This worked fine for me. Print instructions Unassociated tags: yuneec cgo2 Category: R/C Vehicles…
Revised version of the “OnStep Motor Mounts for EQ5” with support for RX16 connectors . The motor housing provides a clean, mechanically solid connector interface and reduces strain on the wiring. Designed for NEMA17 and a GT2 belt drive…
i've printed with PETG, a bit of flexibility can reduce vibrations of the printer to the camera for better time lapse, consider TPU , but if you don't search excellence you can print also with PLA. Use 2x M4x10 that replace stock screws…
TP-Link Tapo C100/C110 holder for FLSUN Q5 Requires 4x 20mm M5 screws and nuts Print Settings Printer: FLSUN Q5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow Category: 3D Printer Accessories
Knob for Skywatcher HEQ5 Pro RA and DEC Axis Category: Hobby
Hallo zusammen, ich habe für den FLSUN Q5 eine Aufnahme konstruiert, die einen SD-Kartenadapter aufnehmen kann. Das mit den Mikro-SDs war mir einfach zu fummelig. Es gibt zwar einige Halter, aber die haben mir einfach nicht gefallen ;-).…
Hey! This is just a simple handle that I made for our coffe machine - Siemens EQ5. So far working just fine.
This is my design of MKS TS35 V2.0 screen mount for Flsun Q5 - version 2. This screen comes with Robin Nano v3 board, I bought the board and decided to make this mount. It uses the standard screen hole of Flsun Q5. No cutting or any…
The All-Metal Heatbreak from TriangleLabs leaves the nozzle of my Q5 around 3mm lower than it used to be. I took this opportunity to redesign the part fan duct, to try and make one that's more efficient and fits the new nozzle. If you…
Made a simple surface cut so a Walther Q5 SF with Magwell and 15rd Mag inserted fits into the measurement box for BDMP PP3 (220mm x 140mm x 40mm) Use print settings like recommended from the original author. It's important to chose…
Flsun Q5 Mini Sherpa Direct Drive (HGX lite extruder compatible) The extruder is angle mounted allowing full movement on the bed House is a single printable piece, supports are necessary, if you print it upside down less support material.…
This is a counter weight fixture for 20mm rod Use it with 1 or 2 1kg weight. Prints without support. HW needed : M5x15 or longer screw M5 Washer (slide it in the slot) M5 Nut (you can glue is in the print) Do not tighten the plastic nut…
ich war es leid, das beim stromlos schalten der Druckkopf des Q5 immer runter rutschte. Mit 123d Design habe ich dann auf die schnelle einen Haltebügel gezeichnet, der einfach seitlich aufgeklemmt wird. Gegen das verrutschen ist oben beim…
I have made an adapter for the polemaster for my Orion Sirius EQ-G equatorial mount. There are 2 version of this adapter: First iteration : It plug on the red ring of the polemaster Second iteration : The second version is a socket for…
You can use the original screws. The thing with the micro SDs was just too fiddly for me.
Q5 original glass is not a smooth surface, especially easy to accumulate to some residue, cleaning is not very convenient. So I designed and made this glass fixing clip. It can be used for round hot bed glass with diameter 220mm and…
Compatible with all FLSUN that use originally TFT24
This is a custom-designed SP Connect Plus compatible phone mount specifically made for the Audi Q5 (8R model). The mount securely attaches to the dashboard air vent using integrated snap-fit clips. The design is optimized for a snug and…
This is a remix of fificap's " feet for Flsun Q5 ". I've added a gap at the corner for people who have extended their headed bed cables so they can run them up the outside of a leg instead of in the middle of a side. Other than the…
This is a simple mount for the ADXL345. It fit on the bed leveling sensor and is very stable. See the images for more details. You can print as is without support.
For some reason (little kids might have something to do with it) the slider in my fridge (Siemens iQ500, KI81RAD30/03) that controls the humidity of the vegetable drawer, seems to break a lot. Before I had a 3D printer I had to buy a…
The storage boxes that are situated in the door of the Siemens fridge are made of hard plastic. If the plastic which holds the box in the door breaks the box starts hanging down at first and after a while it will fall out of the door. The…
Case for Raspberry Pi 4B can be found under the name iUniker Case.…
Super simple but effective Spool filament holder for FLSUN SR Also compatible with FLSUN Q5 Put Little amount grease inner two parts for spin smooth Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution:…
The faceplate is glued on the box. The file included in the download does not contain a logo. Just add one if you like. Print Settings Supports: Yes Resolution: 0.2 Infill: 15 Filament: PETG
The Problem If you drive an Audi Q5 (FY), you know the struggle: there is almost no dedicated space for sunglasses, keys, or small essentials. Most aftermarket solutions are bulky or require messy adhesives. The Solution This 3D-printed…
hitch receiver insert for Audi, self locking
