1 / 8
FLSUN Q5 LED Light
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For sufficient lighting of the printing area
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 70
- Makes
- 0
- Views
- 661
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The holder is for a 100mm long 24V LED strip with a switch. The rocker switch has 8.2x14.7 mm on the mount. I branched off the 24V at the main board fan. The cables are routed upwards in the V-profile and held in place with V-slot strips. The holder must not be attached more than 15 mm above the profile mount.
Are needed:
1x LED strip 24V 100mm
2x cylinder head screw M4x10
2x hammer nut M4
1x rocker switch
2x jumper cables with socket
1x pin header 2x
V-Slot Cover Snap-On for Ender 3 V2
https://www.thingiverse.com/thing:4866310