1 / 3
Domyos counterweight for EQ5 mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a counter weight fixture for 20mm rod Use it with 1 or 2 1kg weight. Prints without support. HW needed : M5x15…
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 53
- Makes
- 0
- Views
- 297
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a counter weight fixture for 20mm rod Use it with 1 or 2 1kg weight.
Prints without support.
HW needed :
M5x15 or longer screw
M5 Washer (slide it in the slot)
M5 Nut (you can glue is in the print)
Do not tighten the plastic nut too much as it can break the fixture easily. Plastic to plastic thread have a lot of friction so it does not come loose easily.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: Sunlu PLA+ Blue - Recommend stronger plastic