Counting matching models…
Idea A simple way to secure the tripod legs with velcro straps because they always tend to flop around uncontrollably. Design This is my first design done in Fusion 360. The original design I used as a reference had lots of supports to…
Adapting EQ5 (SkyWatcher) telescope mount or similar types to OnStep goto controller , by Howard Dutton project. Accessories recommended OnStep Mini 2.0 Cotroller and Box on base MiniPCB2 and Teensy3.2 or OnStep STM32 Controller and Box…
Easy way to mount Power Supplies, Small PCs, Focuser Controllers, Dew Heater Controllers or anything with a flat side. Print vertically for extra strength around the clamping face, using 15% infill with PETG. Will work on tripod legs…
Remix of original project to get it to fit my Nema17 motors. Extended the length of the mounts and added support to the ethernet breakout board I used for connection so it sits snug without moving about. Used together with GT2 pulleys 12T…
⚠ For v4 kit only ⚠ This is one of my first creations, i wanted to attach my onstep controller to the tripod's legs. Print on the orientation shown in the picture. I printed mine using PETG line height: 0.2mm no supports (but you can try…
This is just a very simple pad you can put under your tripod legs to protect your floor from the metal studs.
Idea This model's idea is a rebuilt and (hopefully) improved version of: https://www.thingiverse.com/thing:3964197 While I liked the original model and for this version used most of its measurements, I had a few issues with it and even my…
Remix of Wuggi's excellent EQ5/HEQ5 tripod leg transport clip to print it without supports. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable Infill: 10 Filament: C-Tech PETG Notes:…
Wanted a knob other than the standard/stock swing-tab bolt that comes stock with the HEQ5 mount. Had tried several designs that just didn't have the clearance or meant that I would have to modify the stock bolts. This solutions allow you…
Standard manual adjustment knobs from skywatcher are crap that breaks as soon as you apply some force to it, so I've designed a better one that has snug fit from the beginning and then it also allows for a lockdown with a m3 bolt screwed…
For travel and transportation I put my EQ5 tripod in a slightly padded tripod bag. After a few flights, I saw that the pin on top of the tripod had damaged the bag from the inside. This cover protects the tripod top and the bag. It it…
Made a remix to fit with the PoleMaster HEQ5 adapter for quick and easy removal.
Baseus power bank bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/7fbQGof 20000mAh 65W or another powerbank with max. size of 65 x 27 mm Happy printing!
HEQ-5 Tripod Adapter With this adapter you get a 1/4" or with a thread adapter 3/8" camera thread on a HEQ-5 tripod. I use it for astrophotography and screw an Omegon polar wedge on it. The adapter is 2 pieces, the bottom piece includes…
Use cases : This is my creation of a grain tank extension for a SIEMENS EQ500 machine. With this addition you can put up to 1kg of coffee in the machine. Impression : PETG for food contact. Please give this design a like if you like it,…
Revised version of the “OnStep Motor Mounts for EQ5” with support for RX16 connectors . The motor housing provides a clean, mechanically solid connector interface and reduces strain on the wiring. Designed for NEMA17 and a GT2 belt drive…
Knob for Skywatcher HEQ5 Pro RA and DEC Axis Category: Hobby
Hey! This is just a simple handle that I made for our coffe machine - Siemens EQ5. So far working just fine.
This is a counter weight fixture for 20mm rod Use it with 1 or 2 1kg weight. Prints without support. HW needed : M5x15 or longer screw M5 Washer (slide it in the slot) M5 Nut (you can glue is in the print) Do not tighten the plastic nut…
I have made an adapter for the polemaster for my Orion Sirius EQ-G equatorial mount. There are 2 version of this adapter: First iteration : It plug on the red ring of the polemaster Second iteration : The second version is a socket for…
Case for Raspberry Pi 4B can be found under the name iUniker Case.…
Remix of wizalex's HEQ5 44mm Tripod Leg Holder to fit 50mm / 2" tripods like the Celestron CG-5 / AVX etc. Also removed excess material in the centre. V1: Original remix with hex-shaped hole. V2: Changed central hole to round to be better…
The EQ5 azimuth bolt knobs are hard to turn and hurt my fingers in the cold. I bought a pack of M6x50mm carriage bolts with nuts but couldn't find a bolt knob model that exactly fitted my needs, so I made my own. This bolt knob supports a…
Designed for quick fitting, it is sturdy enough for my 900gm Minix NEO Z100-0dB fanless PC. Hole spacing is 75mm. My mini PC comes with a metal plate which I bolted to the frame, the PC just slides on. Printed in PETG. The thread has…
A PSU holder for the TOBWOLF DC 36W 12V 3A PSU that attaches to the leg of an EQ5 tripod. This PSU is probably available with different brand names, TOBWOLF is the brand of the one I purchased from Amazon. I designed an appropriate holder…
Unlock advanced astrophotography with our HEQ5 Pro Polar Scope to CCD/DSLR Adapter. Seamlessly attach your camera for accurate polar alignment. Elevate your imaging precision and capture stunning deep-sky wonders. Upgrade your…
Minimal NEMA 17 Motor Mounts for EQ5 / Vixen GP (OnStep) These are compact, minimalist motor mounts designed for the EQ5 / Vixen GP equatorial mount using OnStep . They were designed around the JK42HM40-1684 NEMA 17 stepper motor (0.9°,…
A battery holder for the Anker PowerCore Essential 20000 battery pack that attaches to the leg of an EQ5 tripod. I designed an appropriate holder (in OnShape) for the size of the Anker PowerCore Essential 20000 pack and mashed it onto a…
Hi! I made this to attach to my tripod legs, to stop me kicking them accidentally. Requires 6x M4 threated inserts and 6x M4 countersunk screws. Printed in Copymaster 3D Glow PLA Filament Layer:0.2mm Infill: 20%
Purpose First step when aligning an equatorial mount is a rough alignment of the rotational axis, polaris in the northern hemisphere. The more precise the better for next steps. With a laser beam exactly along the axis of rotation rough…
Customized version of https://www.thingiverse.com/thing:3134224 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3134224 Instructions Using the following options: diameter = 23.6 height = 10 thickness =…
Alternative OpenAstroExplorer EQ5 adapter for tripods with high AZ keys requiring the alu adapter and with shorter central rods that do not fully engage the standard adapter nut placement. I bought a Skywatcher Stainless Steel EQ5 tripod…
Customized version of https://www.thingiverse.com/thing:3134224 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3134224 Instructions Using the following options: diameter = 30.05 height = 7 thickness =…
Customized version of https://www.thingiverse.com/thing:3134224 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3134224 Instructions Using the following options: diameter = 29.95 height = 7 thickness =…
A holder for the TP-Link UH720 powered USB 3 hub that attaches to the leg of an EQ5 tripod. I use this to mount the hub onto a leg of my EQ5 tripod for astrophotography so I only need one USB 3 cable running to the mount, everything else…
What it is A modular mounting set for an EQ5 pier extension (geometry/dimensions per the included drawing). It lets you mount power + control electronics directly onto the pier extension, keeping the setup compact and reducing cable mess.…
A battery holder for the RavPower RP-PB13 battery pack that attaches to the leg of an EQ5 tripod. I designed an appropriate holder (in OnShape) for the size of the RavPower RP-PB13 pack and mashed it onto a z-axis scaled up version of the…
Holder for a powersupply to snap on the legs of an EQ5 mounts legs. Powersupply tied on with cable-ties. Printed in PETG at 0.2mm layer height with no support. Print both parts flat and use M3 heated inserts to add thread to the bracket.…
This is a custom-designed gasket specifically made to fit the Coffee bean container. I created this to ensure a perfect print in 99,5 size ratio TPU
Holder for a powersupply to snap on the legs of an EQ5 mounts legs. Powersupply tied on with cable-ties. Printed in PETG at 0.2mm layer height with no support. Print both parts flat and use M3 heated inserts to add thread to the bracket.…
This is a custom-designed gasket specifically made to fit the Coffee bean container. I created this to ensure a perfect print in 99,5 size ratio TPU
https://www.best-power.cz/bateriove-generatory-230v/bateriovy-generator-viking-vali150/ EQ6 https://www.printables.com/model/1342695-eq6-powerbank-viking-vali150
Hi, I'm back with another useful model. This time it is a tray to hold your accessories when viewing the stars. Designed for EQ5 mount screw. It consists of 2 parts. The tray and threaded rod. The rod has also additional threaded hole at…
2 part ASIAIR holder, one part can be fixed with ducktape and the other part can be screwed on
This is building on top of the design from MikeyB from OnSteps forum. You can see the original here: https://onstep.groups.io/g/main/files/3D-printables/Board%20enclosures%20%28Cases%29/Max%20series%20cases/MaxPCB%20case%20by%20MikeyB…
This is a cable hook to hold cables on a Sky Watcher HEQ5 Pro tripod or other 44.45 diameter tripods
