Prusament Box Swatch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A filament swatch to fit the hole in a Prusament box, plus a generic swatch for other manufacturer's boxes.
- Rating
- 4.857 / 5
- Likes
- 112
- Downloads
- 180
- Makes
- 14
- Views
- 1,310
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Store your filament swatches on the filament box. Quick to print and fit. Easy to remove for comparing colours.
Prusament Swatch
25 minutes to print and 1.8m of filament.
Once printed, insert the back of the swatch in to the hexagonal hole in the Prusament box and twist 30 degrees to secure.
Generic Swatch
18 minutes to print and 1.44m of filament.
To install, use a craft knife to make a small cut in the filament box and twist slightly to move the cardboard sides apart. Insert the back of the swatch into the hole, then twist to secure.
Both swatches are designed to print flat, but can be printed upright if required. Printing upright will increase the print time and will require a small amount of supports.
