1 / 4
Picolongrange - tiny FPV drone with GPS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FPV drone based on Tinywhoop parts
- Rating
- 0 / 5
- Likes
- 76
- Downloads
- 131
- Makes
- 0
- Views
- 2,503
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Hi guys,
after Nanolongrange comes Picolongrange! This is my take on a tiny FPV drone with good range. It is based on a 3d printed 70mm frame and small 1.6" propeller. By using Tinywhoop parts you can keep the costs down. It features
- 500m range
- 2km distance
- 45g AUW
- GPS
Moreover, it is a rather simple build with only the GPS required to be soldered. Check the youtube video for details.
BOM
1s AIO flight controller - go for one with integrated ELRS RX and VTX
Motors
0802 19000KV brushless
Props
Gemfan 1610
Camera
Caddx Ant lite
Alternatively, you can buy a plug and play Tinywhoop