Odyssey 7Q / 7Q+ Support Legs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handy dandy legs to support your precious Convergent Design Odyssey 7Q or 7Q+.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 69
- Makes
- 0
- Views
- 379
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print a pair of these bad boys, slap some 1in hard side on the feet, and mount one to each side of your 7Q using a ¼-20" thumb screw and 2 washers and you'll be in business.
Although I've since upgraded to a fancy-pants Leader for my scopes, when I was using my Odyssey's I'd run them inverted for easy access to the inputs and power jack - but you do you baby.
These are quick to print with PLA. A 0.2mm layer height is plenty, though I recommend a minimum of 3 perimeters just to keep things stiff near the pass-through holes for the thumbscrews.
I've included F3D and STEP files just in case you'd like to tinker.